Telford Hurricane Unvented Indirect Cylinder, 125 Litre
Telford Hurricane 125L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- High flow rates and fast recovery times
- Ideal for use with Gas/Oil boilers
- Duplex stainless steel provides superior corrosion resistance
- 316L grade stainless steel 22mm compression fittings and coils
- Includes 3kw boost immersion heater
- 22mm secondary return included (200L and above)
- Adjustable temperature control
- Resettable safety cut-out
- Factory fitted temperature and pressure relief value
- Expansion vessel & fixing bracket included
- G3 Components included (See below)
- 22mm compression fittings included
- WRAS approved
- Fully ERP compliant
- Titanium immersion heater versions also available
- Lifetime cylinder warranty
- 2-Year components warranty
Technical
- Manufacturer: Telford Cylinders
- Range: Hurricane
- Product Code: HURI125
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 125
- Height (mm): 935
- Diameter (mm): 510
- Weight (kg): 40
- Weight Full (kg): 165
- No. Immersion Heaters: 1
- Thermostat Temperature Setting ( oC): 60oC
- Heat-up Time (Mins): 38
- Recovery Time after 75% draw-off with boiler (Mins): 28
- Heat Loss (kWh/24): 1.48
- Energy Efficiency (%): 62
- ErP Rating: C
- Pressure Regulator (bar): 3.0
Brand | Telford |
---|---|
Manufacturer ID | HURI125 |
Cylinder Capacity | 125 Litre |
Cylinder Heating Type | Indirect |
Cylinder Type | Unvented |