Telford Hurricane Slimline Unvented Direct Cylinder, 250 Litre

Telford Hurricane 250SL range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.

Key Features:

• High flow rates and fast recovery times
• 22mm secondary return included (250SL and above)
• Adjustable temperature control
• Resettable safety cut-out
• Factory fitted temperature and pressure relief value
• Expansion vessel & fixing bracket included
• G3 Components included (See below)
• 22mm compression fittings included
• WRAS approved
• Fully ERP compliant
• Titanium immersion heater versions also available
• Lifetime cylinder warranty
• 2-Year components warranty

Technical

• Manufacturer: Telford Cylinders
• Range: Hurricane
• Cylinder Type: Unvented
• Configuration: Direct
• Nominal Capacity (L): 250
• Height (mm): 1330
• Diameter (mm): 554
• Weight (kg): 60
• Weight Full (kg): 310
• No. Immersion Heaters: 2
• Thermostat Temperature Setting ( ^oC): 60^oC
• Heat-up Time (Mins): 144
• Recovery Time after 75% draw-off with boiler (Mins): 75
• Heat Loss (kWh/24): 2.16
• Energy Efficiency (%): 38
• Annual Consumption (kWh/annum): 2812
• ErP Rating: C
• Load Profile: L
• Pressure Regulator (bar): 3.0