Gledhill PLUHP250SOV 250 Litre Stainles Lite Plus Heat Pump Solar Indirect Open Vented Cylinder

Gledhill PLUHP250SOV 250 Litre Stainless Lite Plus Heat Pump Solar Indirect Open Vented Cylinder

Gledhill has produced an unvented stainless steel unit specifically for heat pump applications providing mains pressure domestic hot water. Utilising the well-established Gledhill StainlessLite Plus unvented hot water cylinder, this product has been developed to maximise the lower temperatures available from the heat pump. The heat exchanger is a totally new design. It consists of a multi-pass corrugated stainless steel tube in parallel to reduce the pressure loss whilst maximising the heat exchange. Many medium to large heat pumps need heat exchangers in the store that will cope with the higher flow rates associated with primary temperatures that are typically 50 or 60 degrees celsius. All the usual features of the Gledhill StainlessLite Plus are maintained together with all the necessary controls and expansion devices included. Due to the fact that many heat pumps will not raise the stored water temperature to 60 degrees Celsius, which is necessary to prevent the growth of legionella, the StainlessLite Plus HP model is supplied with an immersion heater tapping and a thermostat pocket.

Key Features:

• Brand: Gledhill
• Part No(S): PLUHP250SOV
• ErP Rating: B
• Capacity: 250 L
• Material: Stainless Steel
• Designed for use with either air source or ground source heat pumps
• High-efficiency corrugated coil maximises heat transfer to the cylinder of water
• 3kW incoloy immersion heater for emergency back-up
• 90° elbow, flexihose and drain valve supplied as standard
• Standard and slimline models available