Gledhill PLUHP250S 250 Litre Stainless Lite Plus Heat Pump Solar Indirect Unvented Cylinder
In stock
SKU
PLUHP250S
Regular Price
£1,476.29
Now Only
£1,230.24
Gledhill PLUHP250S 250 Litre Stainless Lite Plus Heat Pump Solar Indirect Unvented Cylinder
This Gledhill Stainless Lite Plus Heat Pump Solar Cylinder is a range of unvented hot water storage cylinders which has been specifically designed to fulfil your requirements and it is known for its high-efficiency levels and good performance. This heat exchanger is a totally new design. It consists of a multi-pass corrugated stainless steel tube in parallel to reduce the pressure loss whilst maximising the heat exchange. Many medium to large heat pumps need heat exchangers in the store that will cope with the higher flow rates associated with primary temperatures that are typically 50 or 60 degrees celsius. This Unvented cylinders designed for restricted spaces with optional solar coil. Due to the fact that many heat pumps will not raise the stored water temperature to 60 degrees celsius, which is necessary to prevent the growth of legionella, the StainlessLite Plus HP model is supplied with an immersion heater tapping and a thermostat pocket. It is recommended that a thermostat is fitted which brings the immersion heater on at a temperature just below the heat pump maximum and switches off at 60 or 65 degrees celsius. In this way the use of direct electricity is minimised and most of the water heating is achieved through the heat pump. Every model is designed to deliver high performance and transfer the adequate amount of heat to stored water.
CLICK HERE: Stainless Lite Plus Heat Pump Slimline Unvented Cylinder
Key Features:
- Brand: Gledhill
- Part No(S): PLUHP250S
- ErP Rating: C
- Heat Loss: 74Watts
- Capacity: 248 L
- Height: 1744mm
- Diameter: 550mm
- Weight (empty): 44kg
- Weight (full): 292 kg
- Surface area of HP Coil: 1.94m2
- Dedicated Solar Volume: 88 L
- Number of immersions: 1
- Secondary Return: Yes
- Immersion Heater
- Light in weight
- Corrugated Coil
- Solar Thermal
- 25-year guarantee from the manufacturer
- Designed for use with either air source or ground source heat pumps in addition to solar thermal panels
- High-efficiency corrugated coil maximises heat transfer to the cylinder of water
- 3kW incoloy immersion heater for emergency back-up
- 90° elbow and drain valve supplied as standard
| Brand | Gledhill |
|---|---|
| Manufacturer ID | PLUHP250S |
| Cylinder Heat Loss | 74 Watts |
| Cylinder Capacity | 248 Litre |
| Cylinder Weight (empty) | 44 kg |
| Cylinder Number of immersions | 1 |
| Cylinder Type | Unvented |
| Cylinder ErP Rating | C |
| Cylinder Weight (full) | 292 kg |
| Cylinder Height | 1744mm |
Estimated Delivery:
For Next Day Delivery, order before 1pm. Delivery between 8am & 6pm Monday to Friday. Timed or Saturday deliveries can be arranged with our sales team if required.
Subject to stock availability. UK Mainland only. Delivery fees and times to Northern Ireland, Scottish Highlands & Isles, Isle of Man, Isle of Wight, Isles of Scilly, and the Channel Isles may vary. Deliveries are made during working days only.
Any requests to return an order must be made, in writing, within 14 days of receipt of goods.
To View our complete Return Policy Click on Return and Refunds
