Gledhill 1200mm X 450mm Indirect Gravity Coil

Technical Information

• Brand: Gledhill
• Cylinder Height: 1200mm
• Cylinder Overall Diameter: 450mm
• Guarantee Length: 10 years
• 2017 ErP compliant
• Standard 1 inch male and female tappings are provided, as are compression fittings
• Low heat loss when standing
• 100% recyclable
• Wide range of sizes available

Introducing the Gledhill 1200mm X 450mm Indirect Gravity Coil

The Gledhill Envirofoam Vented Copper Indirect Cylinder 1200×450 was created with the 2010 Part L Building Regulations firmly in mind. Therefore, through Gledhill’s efforts, they have created one of the most environmentally sustainable cylinders available in the UK. Gledhill 1200 X 450 Indirect Gravity Coil is manufactured with the finest material and these cylinders & have strong environmental & credentials. Manufactured to BS1566 and 2017 ErP compliant. These cylinders offer excellent environmental characteristics, including. Industry-leading 35mm HCFC-free insulation. Extremely low standing heat loss. The insulation comprises Polyol, which is obtained from rapeseed oil.

Key Features of Gledhill Stainless Lite Pro Direct Unvented Hot Water Cylinder 300 Litre

• A totally renewable resource
• The product is fully recyclable at the end of its working life since it has a copper internal cylinder
• Industry leading 35mm HCFC free insulation
• Exceptionally low standing heat loss, 2017 ErP compliant
• Insulation incorporates Polyol which is derived from rapeseed oil – a fully renewable resource
• With a copper internal cylinder, the product is fully recyclable at the end of its working life
• Manufactured at 8 locations in the UK, the cylinders have a lower carbon footprint derived from transportation than is typical in the industry

As well as being the most attractive open vented copper cylinder available on the market, you will also benefit from:

• Next day lead time availability
• Compression fittings available
• 25 minute recovery time
• Easy access to immersion heater boss

Benefits of Gledhill 1200mm X 450mm Indirect Gravity Coil

• Indirect Heating: Indirect cylinders are designed to be used with a separate heat source, such as a boiler. The coil within the cylinder allows water to be heated indirectly by the heat source, which can be more energy-efficient and provide better control over water temperature.
• Gravity Coil: A gravity coil allows for the circulation of heated water in a natural, gravity-fed manner. This can be beneficial in situations where a pump is not necessary, potentially reducing energy consumption and operating costs.
• Versatility: Indirect gravity coil cylinders are often versatile and can be used with various heat sources, including traditional boilers or renewable energy systems.
• Large Capacity: A cylinder with dimensions of 1200mm x 450mm likely offers a substantial storage capacity for hot water. This is advantageous for properties with higher hot water demands or for situations where consistent hot water availability is crucial.
• Space Efficiency: While the specific dimensions are given, the design of the cylinder may be optimized for space efficiency, allowing it to fit into various installation locations.
• Durability: Gledhill is a reputable brand, and if the cylinder is constructed with quality materials, it may offer durability and a longer lifespan.
• Heat Retention: The cylinder may feature insulation to minimize heat loss, contributing to energy efficiency and reducing the need for frequent reheating.
• Easy Installation: Depending on the design, the cylinder may be relatively easy to install, especially in gravity-fed systems.

Conclusion:

The indirect heating design allows the cylinder to work with a separate heat source, providing potential energy efficiency and control over water temperature. The inclusion of a gravity coil facilitates natural, gravity-fed circulation of heated water, potentially reducing the need for additional pumps and associated energy costs. The cylinder is likely designed to be versatile, compatible with various heat sources, offering flexibility in its applications. With dimensions of 1200mm x 450mm, the cylinder likely provides a substantial storage capacity for hot water, suitable for properties with higher hot water demands. The design may prioritize space efficiency, allowing for easier integration into different installation locations. If constructed with quality materials, the Gledhill product is likely to offer durability and a longer lifespan. The cylinder may feature insulation to minimize heat loss, contributing to overall energy efficiency and reducing the frequency of reheating. Depending on the design, the cylinder may be relatively easy to install, making it accessible for installation professionals.